#DIY HIGHLIGHT BRUSH SKIN#
#DIY HIGHLIGHT BRUSH LICENSE#
#DIY HIGHLIGHT BRUSH FREE#

I’m sure there are other great at-home bleach kits, but I wanted to make sure we got one that is widely available! (bonus: this kit also comes with a pair of latex gloves!)

If that sells out, it’s also available RIGHT HERE for a couple dollars more.

#DIY HIGHLIGHT BRUSH LICENSE#

I wanted to be as realistic as possible about this so instead of going to the professional beauty supply stores I normally go to, I took Dana to Sally’s Beauty Supply in LA because I know the majority of you will have a Sally’s and you don’t need a license to shop there. Be an adult about this and don’t do things that are unsafe or unclear.įirst things first, you will need a bleach kit.

#DIY HIGHLIGHT BRUSH SKIN#

To start, I’ll tell you the same thing I told Dana: please check all allergies (instructions to conduct an allergy test will be on the box), wear gloves, protective clothing and keep bleach off of your skin and away from your eyes throughout this process. I don’t recommend doing more than a little face frame highlight around the front because by doing more than that you could easily lose control and things could go very, very wrong. But in this day and age, I know people are going to do it anyway, so I figure if you’re audacious enough to try, the least I can do (as everyones digital big sister) is guide you through! All I ask is that you not try to do more than what’s easy and safe for you. But when Dana asked me if it was possible to add a little brightness around the front of her hair at home, as much as I wanted to put her on my schedule and offer to do it for her, something told me we should roll with this and turn this into a guide for those of you who really need it.Īs a professional colorist, it used to be my NIGHTMARE to see people take bleach into their own hands at home. I get asked about DIY highlights all the time and my reaction has always been the same: “JUST DO NOT.”, accompanied by a look that puts the fear of gawd into the person asking. When I was about 14 I started highlighting all of my friends’ hair at home (oh yah… from a cap.) and somehow it always turned out great, so I suppose my initial confidence in this project sprouted from my experimental younger self mixed with my faith in Dana because she’s a smart girl. It is recommended to allow 28 days as the curing time for such surfaces.Last week, something fascinating happened I learned that it IS possible for one to give themselves a mini highlight at home, both safely and beautifully. Also, new masonry surfaces must be allowed to cure completely.For interior surfaces or substrates that are subjected to continuous seepage or dampness, use Asian Paints Smart Care Damp Block before the top coat application.

In case of dents and holes, use Asian Paints Wall Putty or a mix of White cement and fine sand in the ratio of 1:3.In case of dents and holes upto 6mm, use Asian Paints TruCare Super putty to level the surface For filling up cracks that are as deep as 3 mm.When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer. In case of areas having excessive dampness, please use Asian Paints Damp Block to limit further dampness.Growth of fungus, algae or moss should be removed by wire brushing and water.

#DIY HIGHLIGHT BRUSH FREE#

Surfaces should be free from any loose paint, dust or grease before applying Apcolite Premium Emulsion.

And lastly, leave the surface to dry for 3 to 4 hours. If you are using a brush or roller, add 60% to 70% water and if you are using a spray add 70% - 75% water. Now, apply 2 coats of Apcolite Premium Emulsion. If you are using a brush or roller, add 60% - 70% of water or if you are using a spray, add 70% to 75% of water. Again, if you are using a brush, mix 8 - 10% Mineral Turpentine Oil or if you are using a spray, mix 15 - 20% of Mineral Turpentine oil.Ħ) Leave the surface to dry for 6 - 8 hours and later sand it with Emery Paper 320.ħ) Apply one coat of Apcolite Premium Emulsion. Leave the surface to dry for 4 - 6 hours.Ĥ) Sand the surface again with Emery Paper 180 and wipe it clean.ĥ) Then apply 2 coats of Asian paints Wall Primer. If you are using a spray, mix 15 - 20% of Mineral Turpentine Oil.ģ) Apply Asian paints Acrylic Wall Putty and add water as required to make it into a paste. If you are using a brush, mix 8 - 10% of Mineral Turpentine Oil. You can use a brush or a spray for application. 1) Sand the surface with Emery Paper 180 and wipe it clean.Ģ) Apply Asian Paints Wall Primer (Oil based or Water based).

Diy highlight brush